Today, we are looking at another high quality microphone from Rode, which is labeled The World’s Quietest Studio Microphone; The Rode NT1-A.
This is an XLR condenser microphone, which means you will need to connect this to an audio interface that offers +48v of phantom power. For this review, I have connected the mic to my computer using the Focusrite Scarlett 2i2, with the +48v phantom power turned on with my gain set around ~55%. In post, I did boost the signal +6dB as well, but no actual
If you are interested in this microphone kit, it will set you back on Amazon
What’s In the Box
- Pouch / Dust Cover
- Shock Mount
- Pop Filter
- XLR to XLR cable
- 10-Year Warranty
- Frequency Response: 20Hz – 20kHz
- Polar Pattern: Cardioid
- Sensitivity: -31.9dB
- Max SPL: 137dB
- Impedance: 100-Ohms
- Phantom Power: 24v – 48v
Performance / Features
The build quality of this microphone is excellent. We have a full metal construction with a metal grill. Unlike a stage ready dynamic mic, this mic is delicate, so I absolutely recommend using care while handling this. The pouch does not offer any padding, but it can be used as a dust cover while the mic is mounted on your stand. The shock mount is all metal and feels very well built while performing it’s job admirably. The pop filter is attached to the shock mount and did an excellent job at eliminating plosives during the test.
The frequency response of this mic is 20Hz – 20kHz. On the electric guitar, it sounded full and crisp. During the electric guitar test, the palm muting had plenty of punchy low end without sounding muddy, and sharp high end that was not overwhelming. While testing the acoustic, we hear a similar sound; full low-mids, and crisp highs. On the vocals, the mic seemed to focus on the mids and highs without too powerful of a low end. As with every mic, this is based off a single microphone placement, and as you know, playing around with the mic placement is essential when getting the correct tones for your recording.
The cardioid polar pattern offers just the right amount of background noise rejection while maintaining the ability for your room to color the recording. For gamers and podcasters, this may not be ideal because you want as little background noise as possible, but for professional recordings made in a nice room, this will allow your recordings to sound unique to your studio.
- Great build quality
- Great Natural Sound
- Low Signal to Noise Ratio
- Excellent Shock Mount & Pop Filter
- 10 YEAR WARRANTY!!!
As I said with the Rode NT1 review, I love this microphone. I think it sounds excellent, and I will absolutely add this to the mics I rotate for music recording and podcasting. If you like the tone of this microphone, and are looking for very low line noise, I absolutely recommend this mic! Keep in mind it does have a fairly wide polar pattern, which will pick up a bit of background noise, so if you’re concerned with that, you may want to look into some dynamic microphones.
I also don’t think that this is the right mic for people who are just starting on youtube or podcasting. I think that when starting out, you can get by with a much cheaper microphone. Then down the line if you want to improve the audio quality and you are well researched on microphones, then you should consider this microphone.
If you have any additional questions about this microphone, leave them on the youtube video, and I will try to reply ASAP.
Check the latest price > Amazon